Wednesday, 27 January 2010

NEXT POST
My Fourth of Radio Shack " Here in this section I will explain step by step what cost me my new room set up Radio Shack. Image 1 In this picture you can see how I miss a hole to go 2 tubes of 50mm each to spend the RG-213 coaxial cables and Control Rotor. Image 2 It is seen here as I plugged the gap and only see the tubes. Image 3 In this picture you can see the other side of the wall facing the gallery and he was seized and decided to hide these reforms making a big race tubes vertically through the wall of the gallery that even this is not tiled. Image 4 Here he is seen after racing great job you realize that if everything above is bigger because I broke a water pipe was a good shower very interesting. JE JE JE. Image 5 Once inside the radio room and then call a plumber, went to buy a timber of 240 x 80 x 3 cm that will be the big operating table, a few feet and fasteners. And now, to the mine after a few sketches and then clarified that I decided to go riding as he was deciding the distribution of equipment. Image 6 And more evidence of distribution of equipment. Image 7 After giving it more than a thousand rounds had already went to buy more wood, and make several shelves at different heights and have well-distributed teams and ventilated. Image 8 Here you see the first level where there is a height of 25cm so youcan board the buses get in and so are more protected from everything. Image 9 For now is the last photo but as You appreciate in this picture there is still much work to gradually been made, here you see...